Downloads
Architects
.dxf format
.skp format
.rfa format
Installation & service
- How do I know if my facility is suitable for the Dyson Airblade™ hand dryer?
- How much wall space does the Dyson Airblade™ hand dryer require?
- What type of wall surface does the Dyson Airblade™ hand dryer require?
- How much does the Dyson Airblade™ hand dryer weigh?
- What are the electrical requirements?
How do I know if my facility is suitable for the Dyson Airblade™ hand dryer?
We recommend you carry out a simple site survey to ensure your facility is suitable. Ask yourself these questions:
- The AB02 Dyson Airblade™ hand dryer measures 25. 25"x 12" x 10 ". Is there sufficient room for it?
- The AB04 Dyson Airblade™ hand dryer measures 26.25"x 12.1" x 9.7" Is there sufficient room for it?
- Is the location free of obstructions such as opening doors to allow easy access to the Dyson Airblade™ hand dryer?
- For models AB02 120v and AB04 120v - Is there a dedicated 15 amp, 120 volt - 60 Hz., circuit for each hand dryer that is going to be installed?
- For model AB02 208v - Is there a dedicated 7 amp, 208 volt - 3 Phase, 60 hz circuit for each hand dryer that is going to be installed?
How much wall space does the Dyson Airblade™ hand dryer require?
The aluminum Dyson Airblade™ hand dryer (AB02) is (H) 25.25" x (W) 12" x (D) 10".
The PC-ABS Dyson Airblade™ hand dryer (AB04) is (H) 26.25" x (W) 12.1" x (D) 9.7".
What type of wall surface does the Dyson Airblade™ hand dryer require?
The Dyson Airblade™ hand dryer must be mounted on walls which are flat and structurally suitable for the weight and size of a Dyson Airblade™ hand dryer. It is not recommended that the Dyson Airblade™ hand dryer is positioned on weak plasterboard walls.
How much does the Dyson Airblade™ hand dryer weigh?
The aluminum Dyson Airblade™ hand dryer (AB02) weighs 32lbs. The packaged weight is 39lbs.
The PC-ABS Dyson Airblade™ hand dryer (AB04) weighs 22lbs. The packaged weight is 29lbs.
What are the electrical requirements?
The AB02 120v and AB04 120v models of the Dyson Airblade™ hand dryer runs on 110/120v, 60 Hz. AC power. It is recommended that the unit be installed on its own separate time delay or fused electrical supply. Dyson recommends installing the unit on a minimum 15 amp circuit.
The AB02 208v model of the Dyson Airblade™ hand dryer runs on 208v, 60 Hz, 3 phase AC power. It is recommended that the unit be installed on its own separate time delay or fused electrical supply. Dyson recommends installing the unit on a minimum 8 amp circuit.
